Three seconds hydrophilic softener flake finishing chemicals

Request Datasheet & MSDS

Hydrophilic cationic softener flake 

Hydrophilic cationic softener flake is a special amide compound.It is mainly used for the soft finishing of cotton and its blended fabrics.It is especially suitable for bleaching, light-colored cotton, polyester / cotton and other fabrics.It can give the fabric a smooth and soft feel.

Physical and chemical indicators:

Composition: Special fatty amide compound

Appearance: light yellow flakes

PH value: 4.0-6.0 (10% aqueous solution)

Ionicity: Weak cation

Dilution method:

Add the softener flake to the cold water at a ratio of 5-10%, heat to 70-80 ℃ and fully stir until it is completely dissolved, and it will be a uniform slurry.


Padding: 2-3g / L. Working fluid at a temperature of 30-40 ℃ (rolling residual rate 70-90%). Drying.

Exhaust method: 0.3-0.8% (o.w.f), bath ratio 1: 10-15, temperature 20-30 ℃, 15-30min, dehydration and drying.

Application characteristics:

Mainly used for the soft finishing of bleaching, light colors and yarns, fabrics and fabrics with strict requirements for shade;

Has excellent hydrophilicity;

Almost no yellowing, minimal impact on whiteness and shade;

It can be used in the same bath as anion and whitening agent, with non-ionic characteristics;

Excellent salt and alkali resistance;

Low viscosity and low foam.

Storage and packaging:

Store in a cool place with a storage period of 12 mouths.

The packaging is 25 kg / bag, plastic woven bag.

You can also enjoy a full customizable solutions for your special requirements from Tiansheng textile chemical company

Application Guidance